Get your Acura radio code in 3 minutes

- We do not support Fujitsu and JVCKENWOOD devices.
- Turn the ignition to the ON position.
- Turn on the radio and make sure the display shows the message 'CODE'. If you do not see this message, remove the fuse for 1 minute and then go back to step 1.
- Turn off the device.
- Press and hold buttons 1 and 6 (radio station selection buttons), then turn the device on.
- The display will switch between two screens: U with the first 4 digits of the serial number (U2200 for example) and L with the last 4 digits of the serial number (L0055 for example).
- Write down the 8 digits, excluding the letters U and L - this is your radio's serial number. To obtain the code, enter it in the form above.
- Acura TL 2003 - 2007
- Turn the ignition to the ACC (I) position.
- Turn on the radio and make sure the display shows the message 'CODE'. If you do not see this message, remove the fuse for 1 minute and then go back to step 1.
- Turn off the device.
- Press and hold the upper halves of the SEEK/SKIP and CH/DISC buttons, then press and release the PWR/VOL knob. The display will switch between two screens.
- The display will switch between two screens: U with the first 4 digits of the serial number (U2200 for example) and L with the last 4 digits of the serial number (L0055 for example).
- Write down the 8 digits, excluding the letters U and L - this is your radio's serial number. To obtain the code, enter it in the form above.
- If the serial number cannot be read from the radio display, it is necessary to remove the radio and read the code from the label on the casing. Example serial numbers: 542533, 10014744, U1001 L4744, GEB29013851, 954LR052, FBPE066260EW, BJ001841.